panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ gn (agn) asctb13e 201209-t ordering information high sensitivity, with 100mw nominal operating power, in a compact and space saving case gn relays (agn) rohs compliant features 1. compact slim body saves space thanks to the small surface area of 5.7 mm 10.6 mm .224 inch .417 inch and low height of 9.0 mm .354 inch , the packaging density can be increased to allow for much smaller designs. 2. high sensitivity single side stable type (nominal operating power: 100mw) is available 3. outstanding surge resistance. surge breakdown voltage between contacts and coil: 2,500 v 2 10 s (telcordia) surge breakdown voltage between open contacts: 1,500 v 10 160 s (fcc part 68) 4. the use of twin crossbar contacts ensures high contact reliability. agpd contact is used because of its good sul?e resistance. adopting low- gas molding material. coil assembly molding technology which avoids generating volatile gas from coil. 5. increased packaging density due to highly ef?ient magnetic circuit design, leakage ?x is reduced and changes in electrical characteristics from components being mounted close-together are minimized. this all means a packaging density higher than ever before. 6. nominal operating power: 140 mw 7. outstanding vibration and shock resistance. functional shock resistance: 750 m/s 2 destructive shock resistance: 1,000 m/s 2 functional vibration resistance: 10 to 55 hz (at double amplitude of 3.3 mm .130 inch ) destructive vibration resistance: 10 to 55 hz (at double amplitude of 5 mm .197 inch ) 8. sealed construction allows automatic washing. typical applications 1. telephonic equipment 2. telecommunications equipment 3. security equipment 4. test and measurement equipment 5. electronic consumer and audio visual equipment nominal coil voltage (dc) 1h: 1.5v 03: 3v 4h: 4.5v 06: 6v 09: 9v 12: 12v 24: 24v contact arrangement 2: 2 form c type of operation 0: standard type (b.b.m.) agn 2 0 operating function 0: single side stable 1: 1 coil latching 6: high sensitivity single side stable type terminal shape nil: a: s: standard pc board terminal surface-mount terminal a type surface-mount terminal s type packing style nil: x: z: tube packing tape and reel packing (picked from 1/2/3/4 pin side) tape and reel packing (picked from 5/6/7/8 pin side)
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ gn (agn) asctb13e 201209-t types 1. standard pc board terminal standard packing: tube: 50 pcs.; case: 1,000 pcs. 2. surface-mount terminal 1) tube packing : f or each surface-mounted terminal identi?ation, input the following letter. a type: a , s type: s standard packing: tube: 50 pcs.; case: 1,000 pcs. 2) tape and reel packing : f or each surface-mounted terminal identi?ation, input the following letter. a type: a , s type: s standard packing: tape and reel: 500 pcs.; case: 1,000 pcs. notes: 1. tape and reel packing symbol ?z is not marked on the relay. ? type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. please inquire if you require a relay, between 1.5 and 24 v dc, with a voltage not listed. rating 1. coil data 1) single side stable type 2) 1 coil latching type *pulse drive (jis c 5442-1996) nominal coil voltage single side stable 1 coil latching high sensitivity single side stable part no. part no. part no. 1.5v dc agn2001h agn2101h agn2601h 3v dc agn20003 agn21003 agn26003 4.5v dc agn2004h agn2104h agn2604h 6v dc agn20006 agn21006 agn26006 9v dc agn20009 agn21009 agn26009 12v dc agn20012 agn21012 agn26012 24v dc agn20024 agn21024 agn26024 nominal coil voltage single side stable 1 coil latching high sensitivity single side stable part no. part no. part no. 1.5v dc agn200 1h agn210 1h agn260 1h 3v dc agn200 03 agn210 03 agn260 03 4.5v dc agn200 4h agn210 4h agn260 4h 6v dc agn200 06 agn210 06 agn260 06 9v dc agn200 09 agn210 09 agn260 09 12v dc agn200 12 agn210 12 agn260 12 24v dc agn200 24 agn210 24 agn260 24 nominal coil voltage single side stable 1 coil latching high sensitivity single side stable part no. part no. part no. 1.5v dc agn200 1hz agn210 1hz agn260 1hz 3v dc agn200 03z agn210 03z agn260 03z 4.5v dc agn200 4hz agn210 4hz agn260 4hz 6v dc agn200 06z agn210 06z agn260 06z 9v dc agn200 09z agn210 09z agn260 09z 12v dc agn200 12z agn210 12z agn260 12z 24v dc agn200 24z agn210 24z agn260 24z nominal coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 1.5v dc 75%v or less of nominal voltage* (initial) 10%v or more of nominal voltage* (initial) 93.8ma 16 ? 140mw 150%v of nominal voltage 3v dc 46.7ma 64.2 ? 4.5v dc 31ma 145 ? 6v dc 23.3ma 257 ? 9v dc 15.5ma 579 ? 12v dc 11.7ma 1,028 ? 24v dc 9.6ma 2,504 ? 230mw 120%v of nominal voltage nominal coil voltage set voltage (at 20 c 68 f ) reset voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 1.5v dc 75%v or less of nominal voltage* (initial) 75%v or less of nominal voltage* (initial) 66.7ma 22.5 ? 100mw 150%v of nominal voltage 3v dc 33.3ma 90 ? 4.5v dc 22.2ma 202.5 ? 6v dc 16.7ma 360 ? 9v dc 11.1ma 810 ? 12v dc 8.3ma 1,440 ? 24v dc 5.0ma 4,800 ? 120mw
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ gn (agn) asctb13e 201209-t 3) high sensitivity single side stable type *pulse drive (jis c 5442-1996) 2. speci?ations notes: *1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 refer to 6. conditions for operation, transport and storage mentioned in ambient environment (page 24). reference data nominal coil voltage set voltage (at 20 c 68 f ) reset voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 1.5v dc 80%v or less of nominal voltage* (initial) 10%v or more of nominal voltage* (initial) 66.7ma 22.5 ? 100mw 150%v of nominal voltage 3v dc 33.3ma 90 ? 4.5v dc 22.2ma 202.5 ? 6v dc 16.7ma 360 ? 9v dc 11.1ma 810 ? 12v dc 8.3ma 1,440 ? 24v dc 5.0ma 4,800 ? 120mw 120%v of nominal voltage characteristics item speci?ations contact arrangement 2 form c initial contact resistance, max. max. 100 m ? (by voltage drop 6 v dc 1a) contact material stationary contact: agpd+au clad movable contact: agpd rating nominal switching capacity 1 a 30 v dc, 0.3 a 125 v ac (resistive load) max. switching power 30 w (dc), 37.5 v a (ac) (resistive load) max. switching voltage 110 v dc, 125 v ac max. switching current 1 a min. switching capacity (reference value)* 1 10 a 10 mv dc nominal operating power single side stable 140mw (1.5 to 12 v dc), 230mw (24 v dc) high sensitivity single side stable type 100mw (1.5 to 12 v dc), 120mw (24 v dc) 1 coil latching electrical characteristics insulation resistance (initial) min. 1,000m ? (at 500v dc) measurement at same location as ?nitial breakdown voltage section. breakdown voltage (initial) between open contacts 750 vrms for 1min. (detection current: 10ma) between contact and coil 1,500 vrms for 1min. (detection current: 10ma) between contact sets 1,000 vrms for 1min. (detection current: 10ma) surge breakdown voltage (initial) between open contacts 1,500 v (10 160 s) (fcc part 68) between contacts and coil 2,500 v (2 10 s) (telcordia) temperature rise (at 20 c 68 f ) max. 50 c (by resistive method, nominal coil voltage applied to the coil; contact carrying current: 1a.) operate time [set time] (at 20 c 68 f ) max. 4 ms [max. 4 ms] (nominal coil voltage applied to the coil, excluding contact bounce time.) release time [reset time] (at 20 c 68 f ) max. 4 ms [max. 4 ms] (nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) mechanical characteristics shock resistance functional min. 750 m/s 2 (half-wave pulse of sine wave: 6 ms; detection time: 10 s.) destructive min. 1,000 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 3.3 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 5 mm expected life mechanical min. 5 10 7 (at 180 cpm) electrical min. 10 5 (1 a 30 v dc resistive), 10 5 (0.3 a 125 v ac resistive) (at 20 cpm) conditions conditions for operation, transport and storage* 2 ambient temperature: (single side stable, 1 coil latching type) ?0 c to +85 c ?0 f to +185 f (high sensitivity single side stable type) ?0 c to +70 c ?0 f to +158 f humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) max. operating speed (at rated load) 20 cpm unit weight approx. 1 g .035 oz 1. max. switching capacity 2. life curve 3. mechanical life tested sample: agn2004h, 15 pcs. operating speed: 180 cpm 30 100 contact voltage, v 1.0 0.3 dc resistive load ac resistive load switching current, a switching current, a no. of operations, 10 4 0.2 0.4 0.6 0.8 1.0 1.2 100 50 30 40 20 10 0 dc 30v resistive load ac 125v resistive load 4 3.5 3 2.5 2 1.5 1 0.5 100 max. min. 30 50 0 max. min. pick-up voltage drop-out voltage no. of operations, 10 4 v oltage, v
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ gn (agn) asctb13e 201209-t dimensions (mm inch ) 4. electrical life (1a 30v dc resistive load) tested sample: agn2004h, 6 pcs. operating speed: 20 cpm change of pick-up and drop-out voltage change of contact resistance 5. coil temperature rise tested sample: agn2004h, agn20024, 6 pcs. point measured: inside the coil ambient temperature: room temperature 0 max. max. min. min. 20 10 40 60 80 90 70 50 30 100 0510 pick-up voltage drop-out voltage no. of operations, 10 4 ratio against the rated voltage, %v 0 x 20 10 40 60 80 90 70 50 30 100 010 5 n.o. contact n.c. contact x no. of operations, 10 4 contact resistance, m ? 100 110 120 130 140 150 70 60 50 40 30 20 10 0 24v dc type 4.5v dc type 1 a 1 a 0 a 0 a coil applied voltage, % te mperature rise, c 6-(1). operate and release time (without diode) tested sample: agn2004h, 6 pcs. 6-(2). operate and release time (with diode) tested sample: agn2004h, 6 pcs. 7. ambient temperature characteristics tested sample: agn2004h, 6 pcs. 80 90 100 110 120 3 2.5 2 1.5 1 0.5 0 max. max. min. min. release time operate time coil applied voltage, %v operate and release time, ms 80 90 100 110 120 3 2.5 2 1.5 1 0.5 0 max. min. max. min. coil applied voltage, %v operate and release time, ms release time operate time x 60 80 100 40 -40 -20 0 20 -50 50 40 30 20 10 -40 -30 -20 -10 ambient temperature, c rate of change, %v drop-out voltage pick-up voltage x 8. malfunctional shock tested sample: agn2004h 9-(1). in?ence of adjacent mounting tested sample: agn20012, 6 pcs. 9-(2). in?ence of adjacent mounting tested sample: agn20012, 6 pcs. y' y xz z' x' y y' z' z x x' deenergized condition energized condition 1,000m/s 2 1,000m/s 2 1,000m/s 2 1,000m/s 2 1,000m/s 2 1,000m/s 2 0681012 24 -5 -10 0 5 10 -10 0 5 -5 10 on on on off off off drop-out voltage pick-up voltage .236 .315 .394 .472.079 .157 inter-relay distance , mm inch rate of change, %v rate of change, %v 024681012 .079 .157 .236 .315 .394 .472 -10 0 10 -10 -5 -5 5 5 0 10 drop-out voltage pick-up voltage on on on off off off inter-relay distance , mm inch rate of change, %v rate of change, %v the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. pc board terminal external dimensions standard type 10.60 0.3 5.70 0.3 0.40 0.1 (1.50) 2.20 0.15 3.20 0.15 0.25 0.1 3.20 0.15 3.50 0.3 (0.50) 9.00 0.3 .417 .012 .224 .012 .016 .004 (.059) .087 .006 .126 .006 .010 .004 .126 .006 .138 .012 (.020) .354 .012 pc board pattern tolerance: 0.1 .004 3.20 2.20 7.60 3.20 0.85 dia. .126 .087 .299 .126 .033 dia. schematic (bottom view) single side stable high sensitivity single side stable (deenergized condition) 1 coil latching (reset condition) direction indication 8765 1234 direction indication 4 5 2 78 1 6 3 cad data
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ gn (agn) asctb13e 201209-t 2. surface-mount terminal schematic (top view) notes type external dimensions suggested mounting pad (tolerance: 0.1 .004 ) single side stable/1 coil latching/high sensitivity single side stable single side stable/1 coil latching/high sensitivity single side stable a type s type cad data 10.60 0.3 5.70 0.3 0.40 0.1 (1.50) 3.20 0.15 3.20 0.15 0.25 0.1 2.20 0.15 7.40 0.3 (0.50) 9.00 0.3 max. 10.00 .417 .012 .224 .012 .016 .004 (.059) .126 .006 .126 .006 .010 .004 .087 .006 .291 .012 (.020) .354 .012 .394 2.20 3.20 5.30 3.10 0.80 .087 .126 .209 .122 .031 10.60 0.3 5.70 0.3 3.20 0.15 0.40 0.1 (1.50) 0.25 0.1 3.20 0.15 2.20 0.15 5.70 0.3 (0.50) 9.00 0.3 max. 10.00 .417 .012 .224 .012 .126 .006 .016 .004 (.059) .010 .004 .126 .006 .087 .006 .224 .012 (.020) .354 .012 .394 2.20 3.20 4.45 2.25 0.80 .087 .126 .175 .089 .031 single side stable high sensitivity single side stable (deenergized condition) 1 coil latching (reset condition) direction indication 1 234 8 765 direction indication 5678 2 134 1. packing style 1) the relay is packed in a tube with the relay orientation mark on the left side, as shown in the ?ure below. 2) tape and reel packing (a type) (1)-1 tape dimensions mm inch (s type) (1)-2 tape dimensions (2) dimensions of plastic peel mm inch 2. automatic insertion to maintain the internal function of the relay, the chucking pressure should not exceed the values below. chucking pressure in the direction a: 4.9 n {500gf} or less chucking pressure in the direction b: 9.8 n {1 kgf} or less chucking pressure in the direction c: 9.8 n {1 kgf} or less please chuck the portion. av oid chucking the center of the relay. in addition, excessive chucking pressure to the pinpoint of the relay should be av oided. orientation (indicates pin no.1)stripe stopper (green) stopper (red) relay polarity bar (z type) tape coming out direction general tolerance 0.1 mm .004 inch 4.00 1.75 0.40 10.70 0.2 2.00 2.00 dia. gn relays 16.00 8.00 11.50 24.00 0.3 11.10 1.50 +0.1 0 dia. .059 +.004 0 dia. .157 .069 .016 .421 .008 .079 .079 dia. .630 .315 .453 .945 .012 .437 relay polarity bar (z type) tape coming out direction general tolerance 0.1 mm .004 inch 1.50 +0.1 0 dia. .059 +.004 0 dia. 2.0 dia. 4.00 1.75 10.70 0.2 0.40 2.00 gn relays 16.00 6.3 11.50 11.10 24.00 0.3 .079 dia. .157 .069 .421 .008 .016 .079 .630 .248 .453 .437 .945 .012 2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 80 dia. 3.150 dia. 380 dia. 14.961 dia. for general cautions for use, please refer to the ?autions for use of signal relays or ?eneral application guidelines? a c b
|
